LCD12864 case with Power and Light control (HEVO)
Description
"REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER" I added embedded control for Power and Ligh, this works in close relation with the project --> https://www.thingiverse.com/thing:4305144 Assembly: - Bottom and High_Braket are glued together, superglue - Low_Braket and High_Braket are mounted together with an M5 screw and nut - Everything is mounted on an aluminum frame with a T-nut and screw. Light and power witch are design for TTP223 (red) touch sensor, the connector used is an XH2.54-4P (4 pins) TTP223 modules must be configured in "Momentary & Active LOW". Diversity: Low_Braket_v1 --> Compact, more useful for vertical mounting. Low_Braket_v2 --> Offers a much larger tilting angle OnShape Link: https://cad.onshape.com/documents/1a02576312d51a5d6a59971c/w/9e4494d14c4433d704749520/e/9f0d9f4daaf39fc24f3115da
Statistics
Likes
4
Downloads
0