Buck Converter Mount for Hero Me
Description
This is designed to allow the installation of an LM2596 Buck converter on a PCB to a Hero Me Gen3 (although it should allow any PCB with mounting holes that are 15x30mm apart). I've only changed the Creality Ender 5/Ender 3 mount of the Hero Me; if you want to use this on another mount, the centre to centre distance for the mounting holes is 10.625 mm. To assemble, bolt the hero me to the base of the mount in this file using the 15-30 mm bolts. Insert the 6mm bolt in the recessed hole and the 10mm bolt in the raised hole. Use the 10mm bolt as a guide when tightening the 6mm bolt, then remove the 10mm bolt, seat the boost converter and insert and tighten both 10mm bolts. You will need: 1x M3x6mm bolt 2x M3x10mm bolts 1x M3 Nut 2x M3x(15-30)mm bolt (for mounting to the rest of the Hero Me)
Statistics
Likes
2
Downloads
0