Russian boxcar series 11-270, HO scale
Description
This is a 1/87 scale model of Soviet/Russian boxcar series 11-270. It's general dimensions and big details are modeled rather precise, but undercarriage equipment are somewhat symbolic and rough. Assembly is shown on the following picture:  Notes: * I cannot stress this enough: the bed must be really flat, or you need some compensation mechanisms, like level sensor and mesh bed leveling enabled. Good adhesion is a must for this thin and detailed print. * 2 versions of car can be printed - with ladders and hatches on roof (use "top v2", "ladder h" and "ladder v") and without (use "top v1"). * bottom is modeled for Mehano american bogies with integrated couplers. Other bogies with M4 screw will fit. M3 screw will fit when fixed by a nut. * If bridges print well on your machine, ladders can be printed in one piece with top and front sides. * Doors are movable but might require some filing. They are symmetrical and will fit upside down. v1 and v2 only differ in position of decorative plate for lock. * Bottom ladder (ladder 3) is movable (can be folded) but since it can fall off during moving of the car, it should better be glued in one position. * On render there are 2 brake wheels on each side of car, but only one is present on real cars. Just print only one. Sources of pictures and schematics: * http://scaletrainsclub.com/board/viewtopic.php?f=46&t=5708 * http://scaletrainsclub.com/board/viewtopic.php?f=46&t=4692
Statistics
Likes
31
Downloads
0