Battery siemens sl91
Description
Battery chassis for prototype Siemens sl91 The controller is taken from Benq Siemens ef81. Contacts of battery - from batteries of the x55-x65 series. All battery wiring is soldered by the thinnest wire. In my case, a flat ribbon cable from the printer. The controller is laid along one of the walls of the housing. Crossing the controller will not work - the controller board is too long. The space inside the future battery case is 48mm long and 29mm wide. The thickness of the can is not more than 5.9mm. It is possible to lay the battery controller on top if the battery bank is no thicker than 4mm, otherwise the battery door will not close. Thanks, Enjoy!
Statistics
Likes
0
Downloads
0