5mm Motor Shaft Support with Bearing
Description
This is a small support for the Motor Shaft of a Nema17 Motor with 5mm Shaft. I use this on the Y-Axis of my AM8. Propably this will fit any Nema 17 and give more support for higher Belt tension. I use this with 30mm M3 Screws (The Motor Mount is 6mm thick, this Bearing Carriage 20mm). The small hole on the top is to tighten the screws of the Motor Pulley while being mounted. You will need: -4Pcs M3x30 -1Pcs Bearing 11x5x4 This is the Motor Mount i use https://www.thingiverse.com/thing:4308400
Statistics
Likes
2
Downloads
0