Anycubic i3 Mega Titan Aero Mount
Description
This mount was designed to work with parts from this X Carriage design (https://www.thingiverse.com/thing:2838383). Use the "X-Carriage", "GT2_Belt_Holder" and "Plate_Holder" models from that design. The "Extruder Mount" should be the only part that needs supports for the circle around the motor. Screw holes shouldn't need supports Layer fan should be ABS but was designed to be far away from the heater block to it may be ok in PETG. Everything else will work in PETG or ABS. You will need to modify the X axis limit switch mount to get the home position all the way into the corner of the bed. I just bent the mount until it was position like it is in the photo. This is the cable track I used, it's large enough to get the connector though without having to remove all the wires from it. Cable Drag Chain, URBEST 15mm x 20mm Flexible 1 M/ 3.3Ft Plastic Cable Carrier Wire for CNC Machine https://www.amazon.com/dp/B074Z28TY1/ref=cm_sw_r_sms_apa_i_YBhPEb2NH6CPP
Statistics
Likes
5
Downloads
0