Anet A6 - SKR 1.3 / 1.4 / 1.4 turbo mainboard case
Description
I did it! This is my first design here. This is a mainboard case for the Anet A6 with stock frame to use with BTT SKR1.3 and 1.4 Mainboards. I flipped the connection ports to the top so you have access to USB and SD, inspired by a design I had before. On the left side under the mainboard you can place a mosfet. I don`t have the 1.3 board but the sizes for the holes and ports are identical. Installation instructions: 1. After printing place the nuts in the holder for the cover. Easier when not mounted on the frame. 2. Mount the case with four screws on the stock Anet A6 frame. Take screws with flat heads because one screwhead is under the mainboard, BE AWARE NOT TO SHORTEN ANYTHING! 3. Then mount the mainboard and you can start wiring. I hope it is useful. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy! Additional notes There are some changes to do if you want to replace the stock Anet mainboard: 1. The display wiring needs to be changed, I used jumper wires and it was done quickly (https://www.thingiverse.com/thing:4009810) 2. The polarity of the fan needs to be switched 3. The polarity of the limit switches needs to be switched - in my case only Z because skr1.4 + TMC2209 = sensorless homing ; ) UPDATE because of the wish to add a second mosfet I created an adapter. I only use one mosfet for the heat bed, so I can`t tell if it fits good. I think the cable managment is very important because of the small space.
Statistics
Likes
13
Downloads
0