TM Super90 Accessories (buttstock, rails, shell holder) | Airsoft

Description

Those files are different accessories for the Tokyo Marui Super 90 shotgun, that consist of a front and a rear rail, a 4 shells holder and a shorter buttstock. I'd recommend 100 [%] infill for all of them, except the buttstock that can be filled at 40 [%] without problem (maybe more if you intend to use a sling). - For the front rail, you just need to use the stock screw from the barrels holder. You will need to tap the hole with an M4 tap or maybe try to "force while screwing" as the thread is not modeled. You need to remove the front sight temporarily to glide it on (there's a hole under the barrel to acces the small cruciform screw). - For the rear rail and the shell holder, you need to disassemble the exterior, drill holes, and mill them to have screws flush (beware to choose places where the body is not too thin). Also be careful while dismounting, the plastic is kinda fragile. - For the buttstock, the file CAN'T BE USED as is. In fact, I designed the part, printed it, and only feasible modifications were needed to be mounted, so didn't re-modeled it. So I drilled, cut and sanded what was needed (the main things being the curve for the handle to fit completely, and the line that doesn't really goes well with the rest of the body). I added the STEP file if you'd like to try and modify it yourself.

Statistics

Category

Tags