Shenhui Laser Equipment SH-G3020 Air Carrier
Description
Air carrier designed to fit "aquarium tubing" and to be mounted on the working end of a CO2 laser engraver/etcher. This air carrier functions to blow air onto the working surface to remove any soot/carbon buildup during the etching process. If you want something similar to this, ping me on my thingiverse profile and I would be glad to see what I can do to help! I printed this flipped 180 degrees so that the long tube is facing up. I printed with supports under the bracket and put support blockers inside the tube and underneath the 45 degree angle section of the tube. I had no problems printing the tube, but would suggest making sure you have 2 or less wall layers if you're using a 0.4 mm nozzle. I experienced some weird patterns that didn't print well with 3 or more wall layers. I used two M3 hex bolts to mount it, but the holes on the bracket are sized at 5 mm. Thanks, Enjoy!
Statistics
Likes
0
Downloads
0