150g Antweight Flipper Robot design
Description
This is my design for a 150gram antweight robot that uses 2x FS90R servos and a MG90S servo (for the flipper). Components: 2x FS90R servos 1x MG90S servo 1x TGY- iA6 receiver 1x 3.7v lipo battery Instructions: insert the battery first, then the receiver as shown in the image. Insert the two FS90R servos in place making sure that the axle is closer to the back of the robot. Insert the MG90S servo ontop of the FS90R servo. You can use it as it is or you can design your own flipper to attach to it. My own design is still being worked on
Statistics
Likes
7
Downloads
0