Wanhao D9/500 Camera Mount
Description
Quickly designed this support to add a Logitech HD Pro C920 Web Cam to my D9/500. This was printed on my D9/500 and would need to be broken into parts if printed on a smaller printer. This prints in 5 pieces. Monster Camera Rail x1, Monster Camera Clamp x2 (this file is two pieces) You will need a 1/4-20 bolt to attach the camera itself To attach the camera rail to the side clamps, you will need: 4 - 3mm x 8mm cap head screws 4 - 3mm washers 4 - 3mm nuts I used my https://www.thingiverse.com/thing:4320090 as the adjustment knob on both sides. I embedded a 1/4-20 nut into the cavity in the camera clamp. If you pause before the printer closes the hole, you should be able to drop a 1/4-20 right in and keep printing. DO NOT USE supports everywhere, or you will not be able to embed the nut (or use a support blocker, if that is better for you) This system is designed to be easily adjustable and easily removable at any time (no tools required). HOWEVER, this has the potential to get in the way of larger prints, so before starting a larger print, keep that in mind and act accordingly.
Statistics
Likes
1
Downloads
0