Livarno lux magnifier ball joint
Description
Replacement part printed for a friend. Link between the arm and the top. It does the job, allows articulation, but it is not perfect. If you want to improve it : - the base could be a tiny bit smaller (0.2 mm perhaps) - the sphere should receive a small gutter for a little ball to allow easier movement. Diassembly of the lamp is a bit of a pain, but feasible. You may have to unsold sold back the cable to the Led circular board. Worst than this are the triangular heads screws !! Warning : a strong spring is pushing the part out -> unscrew all 4 screws together (I mean a bit after a bit, and again, and again) or you will never get the last one out.
Statistics
Likes
2
Downloads
0