Manual reel with brake
Description
Just a simple smal, wall mounted reel. you need to print: 2x Scheibe 1x Kurbel 1x HalterL and HalterR or HalterL+R 1x Welle 1x ZahnkappeLH or RH. LH if you want to have the Crank on the Lefthand side. 1x Blocker Scheibe, Kurbel and Zahnkappe must be glued on Welle. I fixed the Blocker with a wire from a paper clip. Raft is needed only for Welle for the crank I used a M6 screw. Printing Time arround 6h
Statistics
Likes
33
Downloads
0