DIY Low Cost FPV Goggles
Description
This Is My Version Of The 5" Fpv Goggles. I Used This Monitor Off Amazon Http://Www.Amazon.Co.Uk/Gp/Product/B00Ejg7Mmu?Psc=1&Redirect=True&Ref_=Oh_Aui_Detailpage_O03_S00 All Three Body Parts Are Printed Separately And Then Glued Together With Ca. The Lens Is A 3X Magnification Fresnel Lens, Also On Amazon: Http://Www.Amazon.Co.Uk/Gp/Product/B00Hhq0Bs6?Psc=1&Redirect=True&Ref_=Oh_Aui_Detailpage_O02_S00 Cut The Lens To Size And Then Glue It With Ca Into The Lens Holder. The Lens Holder Distance To The Eye Can Be Adjusted With A M3/M4 Bolt. I Used Uvex Ski Goggles I Had Lying Around And Since Everybody Uses Something Else, Just Use The Goggle Part And Cut It With A Dremel To Fit Your Goggles. Then Attach That With Hot Glue To The Frame.
Statistics
Likes
48
Downloads
0