VL_Pyörremyrsky wing servo horn cover
Description
Wing servo cover to protect the servo arm and control horn on the VL_Pyörremyrsky by 3DLabPrint. Printed with LW-PLA and weigh 6gms for two. You will need to mirror the part in your slicer to get one for each side. Print settings for LW-PLA Extrusion multiplier (flow): 0.5 Extrusion width: 0.42mm Retraction: 0 Restart (prime): 0.12mm Layer height: 0.2mm Top and bottom layers: 3 Wall perimeters: 3 Infill: 80% Supports: I didn't, but neater if you do. Printer dependent.
Statistics
Likes
2
Downloads
0