Open Z Drift Project and Fusion360 Files.
Description
This is Out of Date and has been Replaced with the V5, It's been left here just for evolutionary reasons.... So Check Out https://www.thingiverse.com/thing:4360727/files and share with us what you create over at https://www.facebook.com/groups/209094766350376/. Hardware wise, You will need 4 pieces of 2mm Rod 15mm long, I cut these from S/S Pushbike Spoke. For the King Pins, you will need 4 X 4.5mm Ball Stud (commonly used on RC Heli's and for steering links. All Holes have .2.2mm clearance hole and a 1.8mm Thread hole, These may need to be cleaned to size with a drill bit, And can be tapped to M2, or use a small guage Screw.
Statistics
Likes
37
Downloads
0