Clod Buster Wheel Adapter for Kyosho Mad Crusher
Description
Adapter to fit ClodBuster wheels on a Kyosho Mad Crusher adding just enough offset to clear the steering knuckles. - The bolt holes are modeled to fit over the studs on the back of original Clod Buster wheels. - To drill the bolt holes, place the adapter in the wheel and drill 2.5mm or 3/32" holes through the wheel using the adapter as a guide. - Remove the adapter and enlarge the holes in the wheel to approximately 3mm. I found that a 1/8" bit can be used while keeping a thin tube from the original studs. - Mount the wheels to the rims using M3 bolts. 12mm is a good length to clear the chamfer and bite into the adapter. - Use M5x16 bolts with blue Loctite or lock washers to mount the wheels on the axles. Use M5x18 if you are using thick washers like Nord-Lock.
Statistics
Likes
3
Downloads
0