Knuckle Grips 23.mm for bicycles
Description
I wanted to try and print some bike grips and brass knuckes. I guess the test print (pictured) was some decent. I sliced the model in half for testing purposes only. Original orientation is Vertical. I will update this remix with the vertical print later with 0.2mm reso. Test print quality settings: Excuse the terrible quality the print. I used 0.8 nozzle for faster print tests. My settings are as follows: Layer height: 0.48mm Width: 0.8mm Perimeters: 6 (for strength) Infill: 20% Lines Supports: No The test grip is roughly 106mm tall and the knuckle diameters might run small for some. I wear a size large in work style gloves and the knuckles are slightly fitted but no issues with fitment. I provided a tinkercad link for those with small skinny or sausage link fingers ;). Feel free to edit and print your sizes out. Dont forget to shout out tis remix and the sources. https://www.tinkercad.com/things/7oaSXjbbcoJ Good luck printing and Enjoy. Peace.
Statistics
Likes
11
Downloads
0