Orballo p3steel Ramps 1.4 enclosure
Description
Hi, I have remixed this box to fit a Ramps 1.4 board onto the Orballo frame (not sure on the version that I have but have had it a couple of years) The door is designed to use a 50mm fan and has been designed to mount on the outside, due to lack of space inside, if space permits it can be mounted inside. At present the case sits flush with the frame, but I may add a spacer to improve airflow through the rear. The link to the magnets I used are below, you may potentially have to reem out the hole a little, I used superglue to fix - https://www.amazon.co.uk/gp/product/B00ZNUTGVG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Issues that I can live with that you may want to adjust Issue 1 - As the Ramps board is deeper than most boards, I have had to make the case thicker this means that it does not open fully, but as I dont go in here very often it is not a problem to me, but you could add in a cut to allow it to open further. Issue 2 The bottom frame mounting holes do not align correctly, but I found that 2 bolts were more than secure
Statistics
Likes
9
Downloads
0