Brio Modular Bridge
Description
Modulare Brücke für Brio, Ikea, etc. Die Brücke zu Erweiterung. Je nach Lust kann man sie nur aus 2 Endstücken, 2 Ednstücke + Mittelteil, oder auch (theoretisch) beliebig vielen Mittelteilen bauen. Die Teile sind so erstellt das sie ohne Support druckbar sind. Zum Verbinden die Bolzen drucken und einkleben. die Bolzen auf etwa 10mm länge zuschneiden, ein Druck am stück ist einfacher daher gibt es 2x 100 mm Bolzenmaterial. Beim drucken mit PLA die Schrumpfung beachten, je nach dem welches Filament ihr benutzt die Bolzen auf ca. 90% skalieren! ------------------ Modular bridge for Brio, Ikea, etc. Depending on your desire, you can build them with 2 end pieces, 2 end pieces + middle part, or (theoretically) any number of middle parts. The parts are created that they can be printed without support. To connect, print and glue the bolts. Cut the bolts to about 10mm in length, one piece printing is easier so there are 2x 100mm bolt material. When printing with PLA, note the shrinkage, depending on which filament you are using, scale the bolts to approx 90%!
Statistics
Likes
6
Downloads
0