Mini Talon canopy for Runcam Phoenix 2
Description
Full credits to MarkQV. Modifyed Marks canopy to fit runcam phoenix 2, the nose is a three piece design. the camera is locked in the two front pieces by two m3 screws and then the front assembly is glued to the foam preferably after laminating. The rear piece has slots for 3 pins in the front that protrudes into corresponding holes in the front piece and a screw in the back. All parts are printed vertically as in the cura picture. The rear piece does not need any supports but it does need a brim. the pieces for the camera needs supports everyware and 20% support density.
Statistics
Likes
1
Downloads
0