Traxxas Blue Eagle LS II / TRX-3 / SRT Chassis Brace
Description
This is a modified version of the rear upper chassis brace for vintage Traxxas vehicles with the double deck chassis design (TRX-3, TCP, Blue Eagle LSII, SRT) that allows for easier removal of modern 7.4V/7.6V Lipo batteries. This is less of an issue for the SRT if you modify the upper deck, but fitting modern batteries can be difficult with the original design. This also has two mounting provisions for installation of an ESC deck. UPDATE 07/29/20: After reviewing some new models for rear bulkheads, I discovered that the design may be off (~0.3-0.5 mm too high) - so it may not align as well as I would have liked in some installations (depending on printer tolerances, car tolerances, etc.). I have since revamped it slightly and it should be aligned and allow for some wider tolerances with some oversized holes that mount to the tower.
Statistics
Likes
0
Downloads
0