Safety Shield Stand for Offices/Workplaces (Corona Virus Safety Equipment)
Description
The designed stand is used to hold 2mm thick Lexan panels (Plexiglass) up to 70 cm height. As you can see in the photos they don't require any fixing to the table, but for major stability a little bit of double sided tape can be used. The screw guarantee higher stability, always maintaining a compact and slim formfactor. There a small gap under the panel (10mm), useful to pass documents and other "office supply stuff". The stand is printed without support, layer height 0.2mm, infill 30 % in PLA, 100% scale. The screw is printed without support, layer height 0.1 mm, infill 30% in PLA, 97% scale. Required printer volume 150 x 150 x 150 I printed the part using a Creality Ender 3 : https://www.amazon.it/gp/product/B081J8TCTZ/ref=as_li_tl?ie=UTF8&camp=3414&creative=21718&creativeASIN=B081J8TCTZ&linkCode=as2&tag=littlebread3d-21&linkId=8f67cbacb39cdf2ab2437497ac005fb6 The PLA used for the print is a SUNLU Salmon Orange PLA: https://www.amazon.it/gp/product/B081J8TCTZ/ref=as_li_tl?ie=UTF8&camp=3414&creative=21718&creativeASIN=B081J8TCTZ&linkCode=as2&tag=littlebread3d-21&linkId=8f67cbacb39cdf2ab2437497ac005fb6 Support me via affiliated Links! https://grabcad.com/library/safety-shield-stand-for-offices-workplaces-corona-virus-safety-equipment-1 Here you can find the original files!
Statistics
Likes
6
Downloads
0