MKS Gen 1.4 Case
Description
A bare-bones design for a MKS GEN 1.4 case. The 6 side plates as well as the fans are glued together. Each plate is 4mm thick, so depending on your wall count and nozzle, the part may not need infill The case has two slots for a 4x4xX fan. I used one 4x4x1 and one 4x4x2 fan for my printer. For reference, 4x4x1 is the fan that comes on your hotend. You will have to break and reapply glue every time you need to access the board, so make sure you get it right!
Statistics
Likes
0
Downloads
0