RC Brushless Motor Pod Wing mount
Description
Wing mount motor pod for most brushless motors. 16x16mm hole pattern. Designed for 2306 size motor but anything around the 22xx (common quad motor) size should work. The ESC can be zip-tied inside the pod. The Shell cover can be secured with a control-rod wire / marker flag wire. Optional arm uses M3 screws to attach to the pod. The base of the arm has a 50x10x1.5mm pocket for a popcile stick/ tongue depressor to create a strong attachment point to the wing/body. Recommend printing vertically. For the Motor-pod, recommend support enforcement up to Z15mm so that the firewall prints well. All other parts don't need support.
Statistics
Likes
7
Downloads
0