Gardena Laubbesen Reparaturkit
Description
This is a spare part for the rake. I have reinforced it with a threaded rod because the original handle holder was constructed too weak. Beside the two printed parts you need: 1x M8 threaded rod (180 mm long) 2x M8 hex nut Glue The screw to mount the part can be reused from the broken part. To assemble it, the threaded rod is inserted through both parts. One part is provided with a pocket for the nut. Before tightening the nut at the end of the rod, glue should be applied to the thread at the nuts and to the area between the parts.
Statistics
Likes
9
Downloads
0