Fang's Body
Description
Fang is a fully 3D printable animatronic dragon. These are the files for Fang's body. The aligner parts and the peg connector are optional. You could use toothpicks instead of the peg aligners. I welded all the body parts (with a plastic welder) together so I had no need for the peg connectors. Once your done the body, you can cover it in scales, which can be found on Fang's skull thingiverse page: https://www.thingiverse.com/thing:4312923 Important Notes: Anything that has (L.B) in its name means that it is Load Bearing. I recommend printing those with a high infill (40-100%). Everything else can be printed with an infill of 10-20%. The parts that need to be printed twice have (x2 Needed) in their name. For the neck and tail you will have to drill out some of the pre-made holes in order to feed the cable through. For the access panel you will need to print a hinge and bolt it to the body and the panel in order to have the panel open and close. Don't worry if the pegs on the right & left side body break off. They are there as a guide to help you align the parts. A few of mine broke off but I was still able to assemble the body properly without re-printing or repairing the part. The Body Parts.zip contains all the body parts along with the assembly pictures. Note: This version of the body is a MK 1 so eventually it may be upgraded (After I finish my other projects). This body is designed to be a general shape, once you cover it with scales it should look a lot better. But feel free to make it better if you can ;) Keep up to date with all my latest projects & tutorials here: Link to my Instrucatbles page: https://www.instructables.com/member/pagliaindustries/ Link to my website: https://pagliaindustries.wixsite.com/mysite Link to my youtube page: https://www.youtube.com/channel/UC1OBvuYrBDoy5uEZ0f03G-A
Statistics
Likes
0
Downloads
0