Door Jamb/Hinge Shim/Spacers
Description
Simple Door Jamb/Hinge shim available from 0.5mm to 10mm. Updated (5/2/2020): 1. All files run through NetFabb Online already 2. Changed Holes to Slots to accommodate offset holes 3. Added material saving honeycomb pattern If you find that your door is hard to latch i.e. simply closing won't latch or you find that you have to lift up or push down on the handle and push closed the door for the latch to engage/latch, chances are you need to shim your door jamb hinge/s. If you have to pull up and push closed the door you need to shim the lower hinge and vice versa. You can take a non-permanent marking marker, grease pen, tape, or a combination of said items and place them on the door strike plate. Measure where the latch is striking. Select the appropriate shim size, print fully as this will be taking the weight of the door i.e. 100% infill and 3mm walls.
Statistics
Likes
6
Downloads
0