Human Rhombic Dodecahedron
Description
Twelve seated figure-pairs join together to form a rhombic dodecahedron. Each individual in the pair is part of a ring of four. The figures are joined together at the flat surfaces on the hips. See here for a video of how the figures fit together: https://youtu.be/uGQ630_eaiU For permanent assembly, glue the flat surfaces together. Achieving proper alignment is tricky, so make sure you are comfortable with how the figures fit together. For an interactive assembly, glue 3mm x 3mm cylindrical magnets into the holes provided. The holes for the 3mm x 3mm cylindrical magnets often print with small burrs inside, so it is a good idea to clean them out with a 1/8 inch drill bit before inserting the magnets. It is important to pay attention to magnet polarity or the pieces won't snap together. The pair of magnets on each edge are inserted with opposite polarity. Maintain the same pattern around each edge and across each piece. Use dab of CA glue to hold the magnets in place.
Statistics
Likes
16
Downloads
0