Anet AM8 Frame Kit
Description
After 4 or 5 revisions... this set of 6 parts will hold the entire AM8 Frame together. all M4x8mm Cap head screws, and M5x8mm cap screw for the holes in the end of the z extrusion. the extrusions don't come tapped so you will have to do that yourself. the end screws aren't really necessary once the z motor mount is on everything is sturdy. I made inserts for the vslot to put jam nuts in to screw it to the frame. the rest can be fastened with t slot nuts. There are 4 x M5 holes are for the ends of the 2040 rails and the rails need tapped for that to work. *Jam nuts are half as thick as regular so they can fit* Stay tuned for the complete rebuild, one version with MGN12 rails and the other with original hardware. Message me if you would like these parts printed. Hardware and fastener kits are available too
Statistics
Likes
8
Downloads
0