Clockmaker - 8mm and 12mm LED Strip Mounts
Description
This is a remix of a really cool LED mount flurin created that's been redone frequently...but not with a screw mount, which I need for The Clockmaker project. My LEDs are also 8mm and 12mm instead of the common 10mm, so I included mounts for that. Actually, I threw in a lot of stuff: ### LED Strip Holders - An 8mm (2-wire) and a 12mm (4-wire) LED holder are included. Both versions are 150mm long. - There is a "double wall" 8mm strip for cutting down on glare from both directions - There is a "single wall" 12mm strip with a little bit taller lip, but only one side (good for background lighting) ### Mounting brackets Mounting brackets come with and without fillets, in short and long versions, and with narrow and wide versions. - The ones with no fillet are meant for pan head machine screws, while the standard versions are for wood screws and flat head machine screws. - The standard bracket gives about 12mm standoff; the short version is about 5mm from the base. - The wide mounts are 6mm wider than the narrow ones. Enjoy.
Statistics
Likes
3
Downloads
0