BNMS Face Mask Clip - COVID-19
Description
Hello folks! This is a fabric holder for people who own a 3D printer but do not own a sewing machine. Or for people who even have a sewing machine and not the needed sewing skills. Please, if you think this can be done smarter or better do not hesitate to contact me. And if so, and you additionally think you have too much time and enough FreeCAD/Parts knowledge, ask me for the CAD source file. If you found this useful, please donate what you think it is worth to my http://paypal.me/sysdef Help cover the time of design. This is a completely new construction, inspired by https://www.prusaprinters.org/prints/30380-facemask-clip-with-hinge-for-pla Thanks, Enjoy! --- *** THIS IS NOT MEDICAL EQUIPMENT! *** *** THIS IS PROVIDED AS IS! USE IT AT YOUR OWN RISK! *** *** MAKE SURE YOU KNOW HOW TO DISINFECT 3D PRINTED PARTS! *** https://www.google.com/search?q=how+to+sterilize+3d+printed+objects --- ## You need * Two 30mm long filament pieces. * small pliers * lighter * fabric (about 17cm * 17 cm) * rubber bands (min. 50cm) ## Steps * stick the holder into the base and put the filament into the holes * press the filament carefully but with force into the holes of both sides * cut the endings of the filaments so 2-3mm is left outside * use the lighter to melt the ends of the filament * press against the hot filament to merge/meld it to the base part * add some rubber band to the two eyelets (ca. 25cm, test before you cut 'em) * fold your fabric and put it into the clamp * close the clip Yay! You're done! \o/ ... Well, nope! You guessed it, you need two of them. **The clip is easy to close but hard to open. This is by design.** Did I forget anything? Contact me.
Statistics
Likes
11
Downloads
0