CTC A8 DIY I3 Heatbed Cable Fixation
Description
Fixation for the cables of the heatbed of a CTC A8 printer. This printer is sold with various names, like A6, A8, DIY i3 and others. Check the locations of the heatbed screws and make sure it fits with your printer! There is a left and right version of the part, depending where the electronics is located. Print it with support or flip it 90 degrees and print it standing with no or little support. The part has to be added between the spring and the heatbed, if possible fix it with a nut and washer. The cables can then be fixed with two cable ties as shown in the picture.
Statistics
Likes
3
Downloads
0