End Tap Wrench 24 & 28 mm
Description
05/05/2021 Updated version Hi This is a simple tool to mount/unmount End Tap 24(22)mm & 28(26)mm I started the design from this cheap usefull tool https://s.click.aliexpress.com/e/_dThAWYH There is 4 STL File : End Tap 24.28mm Reinforced Wrench Single Part End Tap 24.28mm Reinforced Wrench Multi Part P1 & P2 End Tap 24.28mm Reinforced Wrench Single Part with signs (help to locate flat sides) and a little bit larger bolts holes You can choose to print Single Part , but the infill must be at least 80% in order the part to be resistant Or in order to safe filament, you can use the multi part files, the inner part will be 100% infill and the outer part as you want (30% infill for exemple) In slic3r At the the multipart object detected question you have to reply NO Put the two part on the heatbed click edit for each part, add Infill, set infill parameters you must have a multi part like the picture with the part Blue/Red. Happy Printing. Please if you like, as a simple return, post your print. You can find other tools here ... https://www.thingiverse.com/Renba/designs
Statistics
Likes
33
Downloads
0