LED Mount for Hero Me Gen4 Dual 5015 Duct
Description
**Links to Hero Me Gen4 by mediaman** https://www.thingiverse.com/thing:3433619 https://www.thingiverse.com/thing:3182917 This is an update version of my previews LED bar mount for Hero Me gen3 (https://www.thingiverse.com/thing:4254593), specifically for Gen 4 Hero Me. Mediaman, the author of Hero Me Gen4, has designed an LED bar mount for Gen4. Mine is a remix of his original design. Specifically for LED strip up to 45 mm in length, 10~12 mm in width, 1 mm in back strip thickness. My LED strip is 38x12x1 mm, hard aluminium back. PETG, ABS or other high-temp material is recommended for heat resistance in long run. PLA should be working fine, but it might warp in time. <h3>- Lightweight</h3> - Print strait forward with support - Use brim if necessary - A pair of M3 screws and nuts are needed to mount between two fans. <h3>- Standard dual 5015</h3> - Print without support - Stabilize with 2 zip ties - Improved air channel for better cooling
Statistics
Likes
11
Downloads
0