Garden Row / Plant Marker

Description

This is a remix of the Garden Row Marker by jlauzon72 (https://www.thingiverse.com/thing:2555919). I set a new size and smoothed body. You can use a label with 65mm width and 25mm hight (so you can cut your own label or use normal labels for label maker). This thing has two 45° angled boarders at the marking place area, so if you use a paper, it will be fixed by pushing in. The angled boarders also have a small area with 2mm each on top, where you can glue a transparent foil on. Wrap a foild arround the marker, will work too Scale as needed. The origine hight is about 19cm. Update 10.05.20: Added an extra (V3) marker from which you can better read the label (angle 0° - front, 45° - angled and 90° - top). I tried to make it modular and lightweight so you can use the label model for every of the 2 handles. One handle combines 0° and 90°, so you can switch as you like. For connectivity, i had to make an extra handle for the 45° view. All can be printed in a very short time and without supports. Warping shouldn't be an issue. If you experience it, just use a small brim or print the "closed version", for them you will not need and brim or raft. Printed 4 at the same time without trouble (only skirt). So if your bed is leveled good, you are good to go with the open version.You can see it on the 2nd picture. If you have questions or hints, you are welcome to leave me a comment. All versions printed in 0,15mm, 25% infill with normal speed settings. Label model needs about 39 minutes and handle about 36 minutes with these more detailed settings. The models also does not consume too much filament, so you can print many of these :) I also added 3 very heavy markers with the same angles, which need about 3 hours to print. For these you probably need a good brim or raft (i made a picture of the print with black PLA). They also don't need supports.

Statistics

Category

Tags