Tamiya Dual rider exhaust
Description
heres an exhaust can for the Tamiya Dual rider trike, i printed it upright so the outlet is pointing upwards and it came out ok, needs a 3mm hole drilling/ melting through the rear spoiler thing so you can fasten it with a m3 x8 (ish) bolt or just glue it on, i prefer bolting it so its totally solid though, fit the dual rider well, you might even want to print a pair and have twin exhausts out the back :) the dancing rider will need the bodywork trimming slightly to clear it as the bodywork comes down further than it does on the dual rider. mount it in the middle of the spoiler and only slight bodywork trimming will be needed. i used a piece of 5mm rubber tube to make the downpipe, this will press straight into the exhaust can and you can route it where you like for a scale look im going to make a downpipe stl file and will add it when ive finished :)
Statistics
Likes
5
Downloads
0