Armattan Marmotte / Badger Caddx Orca Mount
Description
This Caddx Orca mount was designed specifically for the Armattan Marmotte or Badger. This front load design provides the most protection while still maintaining an unobstructed view. Printed in TPU A98 with supports in the side windows and the layer heights is adaptive. Unbolt the top carbon plate. Slide it through the loop at the base of the mount. Then bolt the carbon plate back onto the frame. <b>Update 16.06.2020:</b> - CaddxOrcaMount_FrontLoader_V2.stl :: Reworked the holding mechanism on the front. The cam sits now tighter in the mount but more support is required. I also slightly increased the thickness of the holder at the bottom. - CaddxOrcaMount_TopLoader_V1.stl :: A redesign of this mount where the camera can be loaded from the top. Recommendation: Print all the mounts on the side to make sure the holder part on the bottom is as strong as possible. Enjoy your flights!
Statistics
Likes
9
Downloads
0