Spray irrigator radius 5 meter version 2 hoses
Description
The largest part contains 4 holes with a diameter of 3.2 mm. the upper cover is fastened with 4 pieces of M4 screws. Therefore, we have to make a thread for the M4 into the part. I made the necessary seal from a layer of silicone. version 2 - possibility to connect 2 hoses + tool for making Seals I also enclose a tool for making seals. Apply detergent to the tool. After drying, silicone is applied. the seal of the hose connector is pressed out by the second part of the tool by gradually tightening the M8 screw. Allow the seal to harden for 24 hours Thanks, Enjoy!
Statistics
Likes
4
Downloads
0