Optical Audio Cable Door
Description
This print is to replace the broken "door" that covers your Optical Audio Port. If you are using a soundbar for your TV and the little door breaks off, your optical cable won't be able to stay in the port. Using this ramp you will be able to fit the cable in with enough pressure to hold it in place. Lay the ramp on the flat side of the port . Lay the thicker side at the bottom of the port. Make sure the rectangular divot in the ramp is closer to the entrance of the port and facing to the inside. Look at pics for reference, if you can't figure it out let me know and I will try to help. The cable won't "snap" into place but it will become very snug once it is all the way in.
Statistics
Likes
1
Downloads
0