Router plate template
Description
Pattern designed to create a routing template for a router plate or lift that 9.25 by 11.75 inches with a 0.75 corner radius. It fits many of the most common brands. Print 4 parts. The part are reversible and there is a countersunk hole on either side to use with a #6 wood screw. I used the template to make another template out of 1/4 MDF so if anything moves, my table top wouldn't be ruined. I made a frame to keep everything together and put a small piece of tape to keep things aligned. This made a very tight fit and a little bit of sanding made it perfect.
Statistics
Likes
15
Downloads
0