Creality filamentholder
Description
Made this printable bolt for replacing the original creality spoolholder, this part is to replace the plastic part of the holder. Also made a bearing shell/cup for a 20x42x12 bearing, so that i can use it on the filament-holder, ensuring a smooth rollout of the industrial size core size on Form Futura 1kg. filaments I made a new nut, making the little shim on the picture obsolete. Print the bolt with support. 20x42x12 is a cheap bearing i had easy access to, and also alot of hardware stores stock this bearing, that is why i chose that overkill dimension :-) You will need two ball-bearings, one for each side. Also made a adapter with no bearing option, but i strongly recommend using bearings. I recommend printing the bolt with 5 outer walls, and fill at 100%, this bolt need to be strong. There is also a extra long bolt here for 3Kg. rolls. Feel free to comment, and give suggestions for improvements.
Statistics
Likes
14
Downloads
0