Umma95 - Naked GoPro Beta95x Conversion
Description
Just like the umma85, but this time in beautiful digital HD. The BetaFPV Beta95x HD is slightly larger than the Beta85x, with larger motors and propellers, but also carries the Caddx Vista DJI Digital FPV system. We gave it the same treatment of flipping it over, relocating the Vista unit and the camera, and creating a "clean and dirty" section to ensure vibration free video from both the FPV camera and the naked GoPro. All printed in 98A TPU at 100% infill. Carbon fiber part cut from 1mm carbon sheet. (carbon part can be printed as well, but mileage may vary) Hardware required: (12) M2 x 6mm self tapping screws - attaches the clean section to the isolators, the rear part of the vista, side "legs" of the gopro camera mount, the rear main board mount, and the *GoPro camera flange to the TPU mount. OPTIONAL (2) M2 x 8mm self tapping screws - attaches the GoPro camera to the mount if using the ND filter mount. (1) M2 x 12mm self tapping screw - attaches the GoPro board, to the FPV cam mount, to the GoPro camera mount. (1) M1 x 6mm self tapping screw - attaches the front of the vista to the frame (8) M2 x 6mm machine screws - attaches the isolators to the motor mount holes. Update: Added a version of the GoPro camera mount, that protects it a bit better when flipped over. Also added the ND filter adapter that allows you to use ND filters for the Mavic Pro Zoom. We've tested it with freewell brand and only shows a tiny bit in the corners that disappear when using reelsteady.
Statistics
Likes
102
Downloads
0