Volvo P1 Generic Gas Cap Lanyard / Tether
Description
I bought a used Volvo C30 and saw that it didn't have the OEM gas cap. I didn't like the fact that it didn't have a tether (and didn't want to hold it or place on the roof), so I made a tether to hold it in a similar fashion to the OEM one. I think it came out pretty well. I designed it with this particular cap that was with the car when I got it. I think it'll fit other caps that are around 70mm in diameter as I designed it with that in mind. I stays in place due to a slight lip on the cap. I used TPU so it'll flex. I used 50% infill, but higher infill percentage will probably last longer.
Statistics
Likes
14
Downloads
0