Go Pro - floater - grip - two parts
Description
I did not found a GoPro floater to my liking so I designed one. The floater is made from two parts that can be glued or fixed using a 1.75 mm filament inserted in the holes and melted at the ends so it will not fall out. The W part has extra width at the base for more strength. I've made it from two parts because it's easier to change the top part in case it brakes. If needed, there is a small hole on the bottom to add a strap and secure it to your hand. It's printed using PETG and 0.2 mm layer height. It should be printed with the holes facing the plate, so a brim is really necessary.
Statistics
Likes
1
Downloads
0