VESA 100mm Rotation Adapter
Description
This is a VESA 100mm adapter that turns any compatible monitor and mount into a rotating mount. Attach the "inner" mount to your monitor and the "outer" to your stand/mount. The top can be screwed on with M4 bolts/screws which are the same size used for VESA 100mm mounts. Assembly: 1. Attach "Outer" mount to your existing monitor stand/mount using M4 nuts and bolts. Make sure the "open" side of the mount is facing up. 2. Attach "Inner" mount to your monitor using M4 bolts. 3. Slide the monitor onto the mount. 4. (Optional) Screw in M4 bolts into the "top" piece. Attach top to the "outer" mount and tighten until the monitor has the desired resistance. Two additional top plates were added. One with 1MM trimmed off the bottom for a more snug fit. The other with 2MM. This allows for a tighter fit of the wheel within the mount and should provide enough friction to keep the monitor from rotating on its own.
Statistics
Likes
8
Downloads
0