Pi Zero Audio Box
Description
Decided to give my Pi zero audio project a case. The speaker is almost same footprint as zero and was going for a retro look. The back cover just fits in the feet hole, again snug but simple. I did shorten the speaker cable. Maybe a v3 would have space for a pp9 battery under the unit soit could be standalone. There is a bumper model that I will print in flex that will stop it sliding around my desk. Pin holes are for a grill but its so small really does not need one. SW is ongoing but target is to have radio, Alexa and Google home support.. The mics on the card are very good so I left a port for them as well as a slot to allow the LEDs to show through. https://developer.amazon.com/en-GB/docs/alexa/alexa-voice-service/build-the-avs-device-sdk.html UPDATE: The zero is too slow for running Alexa SDK but Google assist does support zero so shifting focus to that platform. The guide is good and I am in the process of installing having already installed the drivers. Cqrobot Arduino JST PH2.0 Interface Speaker 3 Watt 8 Ohm KEYESTUDIO ReSpeaker 2-Mic Pi HAT V1.0 for Raspberry Pi Zero Raspberry Pi Zero WH 512 MB Creality CR10s printer and PLA
Statistics
Likes
5
Downloads
0