scx10 rock sliders
Description
This is a set of rock sliders for a axial scx10 ii deadbolt bolt but will fit any axial scx10 ii frame but may require trimming for aesthetic reasons depending on the body used. They shouls also fit scx10 I frames as well. They mount with 4 screws per side to the axial base plates that come off the frame rail. the outer most holes line up with the preexisting holes in the base plate. The other set of holes may have to be drilled yourself depending on your electronics configuration. these will have to be scaled up once put into a slicer since they where drawn on fusion360. overall length should be 5.288" or 134.315mm. Use that to scale everything as a locked ratio.
Statistics
Likes
28
Downloads
0