Extra Clearance Phone Stand
Description
I needed a phone stand that is reasonably universal and solved three issues. 1. I wanted the bottom of the phone to be completely uncovered so that headphone jacks, charging ports, and speakers would not be affected. 2. I needed enough clearance beneath the phone for the long cable ends of my headphones and usb-c adapter. 3. I wanted to be able to easily dock and remove the phone without unplugging the cables. The phone is angled to 60deg. Compatible with phone widths of 65mm-86mm. Though the extreme ends of this spectrum probably wouldn't work that well. The supports for the bottom of the phone are angled in order to center the phone by making contact with each of the bottom corners. There is a lip on the corner supports to prevent the phone from slipping out towards you. A slight revision was made to the model which is not captured in the photos. I added additional forward support to make the stand more stable. I've included the Fusion 360, .step, and .stl files. Enjoy!
Statistics
Likes
6
Downloads
0