RAM 7/8" Handlebar Mount
Description
UPDATED 17JUN2020: V2 now incorporates a wider 1" base to further distribute load. Internal axial compression strengthener may be incorporated by the means of additional M3x30 mm hex cap screw and nut (1x each) through center axis of ball mounting point. Produces pre-load compression on printed layers when printed with the bolt hole orthogonal to the printing surface. May prevent catastrophic failure or loss of attached device when struck by force exceeding material specifications. Please still tether your wireless communication device, phaser, handheld geiger counter, or vaping devise... ------------------ Original Posting -------------------- Ram ball mount for 7/8" handlebars. Compatible with 1 inch "ball" style supports of any type. Useful for GPS applications or just for visibility while riding. *Recommend a backup tether until you're comfortable with the print. Save that cell phone! Hardware: M3x12 mm hex, cap screws (4x each) M3 mm nylon lock nut (4x each) Use caution to prevent over tightening and undue stress on the supporting members. Clearance is built into the two components and they can be tightened adequately without touching top and bottom components.
Statistics
Likes
6
Downloads
0